| Instrument
characteristics |
| Models & options |
| 33509B/11B/19B/21B |
1-channel |
| 33510B/12B/20B/22B |
2-channel |
| Option MEM |
Increases arbitrary waveform memory to 16 MSa/channel* |
| Option OCX |
OCXO timebase for ultra-high stability |
| Option IQP |
IQ player (Only available on 33512B and 33522B) |
| Waveforms |
| Standard |
Sine, square, ramp, pulse, triangle, Gaussian noise, PRBS (Pseudorandom Binary Sequence), DC |
| Built-in arbitrary* |
Cardiac, exponential fall, exponential rise, Gaussian
pulse, Haversine, Lorentz, D-Lorentz,
negative ramp, sinc |
| User-defined arbitrary* |
Up to 1 MSa (16 MSa with Option MEM) with multi-segment
sequencing |
| Operating modes &
modulation types |
| Operating modes |
Continuous, modulate, frequency sweep, burst, output gate |
| Modulation types |
AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation) |
| Waveform characteristics |
|
| Sine |
|
| Frequency range |
1 μHz to 20 MHz or 30 MHz, 1 μHz resolution |
Amplitude flatness (spec)1, 2
(relative to 1 kHz) |
< 100 kHz: |
± 0.10 dB |
| 100 kHz to 5 MHz: |
± 0.15 dB |
| 5 to 20 MHz: |
± 0.30 dB |
| 20 to 30 MHz:** |
± 0.40 dB |
| Harmonic
distortion (typ) 2, 3 |
< 20 kHz: |
< -70 dBc |
| 20 to 100 kHz: |
< -65 dBc |
| 100 kHz to 1 MHz: |
< -50 dBc |
| 1 to 20 MHz: |
< -40 dBc |
| 20 to 30 MHz:** |
< -35 dBc |
| THD (typ) |
20 Hz to 20 kHz: |
< 0.04% |
| Non-harmonic spurious (typ) 2,
3 |
Standard: < -75
dBc, increasing +20 dB/decade above 2 MHz
Option OCX: < -75 dBc, increasing +20 dB/decade above 10 MHz
(or < -100 dBm, whichever is greater, below 500 MHz) |
| Phase noise (SSB) (typ) |
Standard |
Option OCX |
| 1 kHz offset: |
-105 |
-110 dBc/Hz |
| 10 kHz offset: |
-115 |
-125 dBc/Hz |
| 100 kHz offset: |
-125 |
-135 dBc/Hz |
| *Only available on
33511B/12B/21B/22B |
| **Only available on
33519B/20B/21B/22B |
| NOTE: See page 22 for
footnotes 1 through 10 |
| Square & pulse |
| Frequency range |
1 μHz to 20 MHz or 30 MHz, 1 μHz
resolution |
| Rise and fall times (nom) |
Square: 8.4 ns, fixed Pulse: 8.4 ns to 1 μs, independently
variable, 100-ps or 3-digit resolution |
| Overshoot (typ) |
< 2% |
| Duty cycle |
0.01% to 99.99% 8 |
| Pulse width |
16 ns minimum, 100-ps resolution |
| Jitter (cycle-to-cycle, typ) |
< 40 ps rms |
| Ramp & triangle |
| Frequency range |
1 μHz to 200 kHz, 1 μHz resolution |
| Ramp symmetry |
0.0% to 100.0%, 0.1% resolution (0% is negative ramp, 100% is positive
ramp, 50% is Triangle) |
| Nonlinearity (typ) |
< 0.05% from 5% to 95% of the signal amplitude |
| Gaussian noise |
| Bandwidth (typ) |
1 mHz to 20 MHz or 30 MHz, variable |
| Crest factor (nom) |
4,6 |
| Repetition period |
> 50 years |
| Pseudorandom binary sequence
(PRBS) |
| Bit rate |
1 mbps to 50 Mbps, 1 mbps resolution |
| Sequence length |
2m -1, m=7, 9, 11, 15, 20, 23 |
| Rise and fall times (nom) |
8.4 ns to 1 μs, variable, 100-ps or 3-digit
resolution |
| Arbitrary waveform
characteristics |
| General
Waveform length |
8 Sa to 1 MSa per channel (16 MSa with Option OCX)
in increments of 1 sample |
| Sample rate |
1 μSa∕s to 250 MSa/s, 1 μSa∕s
resolution |
| Voltage resolution |
16 bits |
| Bandwidth (-3 dB, nom) |
Filter Off: 40 MHz
"Normal" Filter On: 0.27 x (Sample Rate) "Step" Filter On: 0.13 x (Sample
Rate) |
| Rise and fall time |
0.35 / Bandwidth (10 ns min) with "Normal"
or "Step" filter On |
| Settling time (typ) |
< 200 ns to 0.5% of final value |
| Jitter (typ) |
Filter Off: < 40 ps rms "Normal" or
"Step" filter On: < 5 ps |
| IQ Player Characteristics |
| Balance Adjust |
| Amplitude Gain (channel to channel amplitude balance) |
-30% to +30% |
| Delta Offset Ch 1 and Ch 2 |
± (5 VDC - Peak AC) into 50 Ω ± (10 VDC - Peak
AC) into open circuit |
| IQ Signal Skew (adjusts channel to channel skew) |
-4.00 ns to +4.00 ns |
| Views |
| Amplitude vs. Time |
| X-Y (constellation diagram) |
| Waveform sequencing (Available
only on 33511B/12B/21B/22B) |
| Operation |
Individual arbitrary waveforms (segments) can be combined into
user-defined lists (sequences) to form longer, more complex waveforms. Each
sequence step specifies whether to repeat the associated segment a certain
number of times, to repeat it indefinitely, to repeat it until a Trigger
event occurs, or to stop and wait for a Trigger event. Additionally, the
behavior of the Sync output can be
specified in each step. To improve throughput,
up to 32 sequences totalling up to 1,024 segments can be pre-loaded into
volatile memory. |
| Segment length |
8 Sa to 1 MSa per channel (16 MSa with Option MEM) in
increments of 1 sample |
| Sequence length |
1 to 512 steps |
| Segment repeat count |
1 to 1x106, or infinite |
| Output characteristics |
| Isolation |
| Outputs |
Connector shells for channel output(s), Sync, and Mod In are
connected together but isolated from the instrument's chassis. Maximum
allowable voltage on isolated connector shells is ±42 Vpk |
| Signal output |
| Output impedance (nom) |
50 Ω |
| On, off, inverted |
User-selectable for each channel |
| Voltage limit |
User-definable VMAX and VMIN limits |
| Overload protection |
Output turns off automatically when an overload is applied Instrument will tolerate a short-circuit to
ground indefinitely |
| Amplitude |
| Range |
1 mVpp to 10 Vpp into
50 Ω
2 mVpp to 20 Vpp into open circuit |
| Resolution |
4 digits |
| Units |
Vpp, Vrms, or dBm, selectable |
| Accuracy 1,2 (spec) |
±1% of setting ±1 mVpp at 1 kHz |
| DC offset |
| Range 5 |
±(5 VDC - Peak AC) into 50 Ω ±(10 VDC - Peak AC) into open
circuit |
| Resolution |
4 digits |
| Units |
VDC |
| Accuracy 1,2 (spec) |
±1% of Offset setting ±0.25% of Amplitude setting ±2mV |
| Frequency accuracy |
| Standard frequency reference
(spec) |
| 1 year, 23° C ± 5° C |
±1 ppm of setting ± 15 pHz |
| 1 year, 0° C to 55° C |
±2 ppm of setting ± 15 pHz |
| High-stability frequency
reference (spec): Option OCX |
| 1 year, 0° C to 55° C |
±0.1 ppm of setting ± 15 pHz |
| Modulation types and operating
modes |
| Carrier |
AM |
FM |
PM |
FSK |
BPSK |
PWM |
Sum |
Burst |
Sweep |
| Sine and Square |
• |
• |
• |
• |
• |
|
• |
• |
• |
| Pulse |
• |
• |
• |
• |
• |
• |
• |
• |
• |
| Triangle and Ramp |
• |
• |
• |
• |
• |
|
• |
• |
• |
| Gaussian Noise |
• |
|
• |
•a |
|
| PRBS |
• |
• |
• |
|
• |
• |
|
| Single ARB* |
• |
|
•b |
|
•b |
|
• |
• |
|
| Sequenced ARB* |
• |
|
• |
|
| a. Gated burst only. b.
Applies to sample clock, not whole waveform. |
| Modulating signals |
| Carrier |
Sine |
Square |
Triangle / Ramp |
Noise |
PRBS |
ARB* |
External |
| Sine |
• |
• |
• |
• |
• |
• |
• |
| Square and Pulse |
• |
• |
• |
• |
• |
• |
• |
| Triangle and Ramp |
• |
• |
• |
• |
• |
• |
• |
| Gaussian Noise |
• |
• |
• |
|
• |
• |
• |
| PRBS |
• |
• |
• |
• |
|
• |
• |
| ARB* |
• |
• |
• |
• |
• |
|
• |
| * Only applies to
33511B/12B/21B/22B |
| Modulation characteristics |
| Amplitude modulation (AM) |
| Source |
Internal or external, or either channel with 2-channel models |
| Type |
Full-carrier or double-sideband suppressed-carrier |
| Depth 1 |
0% to 120%, 0.01% resolution |
| Frequency modulation (FM) 7 |
| Source |
Internal or external, or either channel with 2-channel models |
| Deviation |
1 μHz to 15 MHz, 1 μHz resolution |
| Phase modulation(PM) |
|
| Source |
Internal or external, or either channel with 2-channel models |
| Deviation |
0° to 360°, 0.1° resolution |
| Frequency shift key modulation
(FSK) 7 |
| Source |
Internal timer or ext trig connector |
| Mark & space |
Any frequency within the carrier signal's range |
| Rate |
0 Hz to 1 MHz |
| Binary phase shift key
modulation (BPSK) |
| Source |
Internal timer or ext trig connector |
| Phase shift |
0° to 360°, 0.1° resolution |
| Rate |
0 Hz to 1 MHz |
| Pulse width modulation (PWM) |
| Source |
Internal or external, or either channel with 2-channel models |
| Deviation 8 |
0% to 100% of pulse width, 0.01% resolution |
| Additive modulation (Sum) |
| Source |
Internal or external, or either channel with 2-channel models |
| Ratio 6 |
0% to 100% of carrier amplitude, 0.01% resolution |
| Burst 9 |
| Type |
Counted or gated |
| Count |
1 to 1x108 cycles, or infinite |
| Gated |
Produces complete cycles while Ext Trig is asserted |
| Start/stop phase 4 |
-360° to 360°, 0.1° resolution |
| Trigger source |
Internal Timer or Ext Trig connector |
| Marker |
Adjustable to any cycle; indicated by the trailing edge of the
Sync pulse |
| Sweep 7 |
| Type |
Linear, Logarithmic, List (up to 128 user-defined frequencies) |
| Operation |
Linear and Logarithmic sweeps are characterized by a Sweep time
(during which the frequency changes smoothly from Start to Stop), a Hold time
(during which the frequency stays at the Stop frequency), and a Return time
(during which the frequency changes smoothly from Stop to Start). Returns are
always linear. |
| Direction |
Up (Start freq < Stop freq) or Down (Start freq > Stop
freq) |
| Start and stop frequencies |
Any frequency within the waveform's range |
| Sweep time |
Linear: 1 ms to 3600 s, 1 ms
resolution;
3601 s to
250,000 s, 1 s resolution
Logarithmic: 1 ms to 500 s |
| Hold time |
0 s to 3600 s, 1 ms resolution |
| Return time |
0 s to 3600 s, 1 ms resolution |
| Trigger source 10 |
Immediate (continuous), external, single, bus, or timer |
| Marker |
Adjustable to any frequency between Start and Stop for Linear
and Logarithmic types or any frequency in the list for List type; indicated
by the trailing edge of the sync pulse |
| Internal timer for FSK, BPSK,
BURST, and SWEEP |
| Range |
1 μs to 8000s, 6-digit or 4 ns resolution |
| 2-channel characteristics
(Only applies to 33519B/20B/21B/22B) |
| Operating modes |
Independent, coupled parameter(s), combined (Ch 1 + Ch 2), Equal (Ch 2 = Ch 1), or differential (Ch 2
= -Ch 1) |
| Parameter coupling |
None, frequency (ratio or difference) and/or amplitude and DC
offset |
| Relative phase |
0° to 360°, 0.1° resolution |
| Skew (typ) |
< 200 ps (when performing identical operations) |
| Crosstalk (typ) |
< -85 dB |
| Sync/marker output |
| Connector |
Front-panel BNC, isolated from chassis |
| Functions |
Sync, sweep marker, burst marker, or arbitrary waveform marker |
| Assignment |
Channel 1 or channel 2 |
| Polarity |
Normal or inverted |
| Voltage level (nom) |
3 Vpp into open circuit, 1.5 Vpp into 50 Ω |
| Output impedance (nom) |
50 Ω |
| Minimum pulse width (nom) |
16 ns |
| External trigger/gate |
| Connector |
Rear-panel BNC, chassis-referenced |
| Function |
Input or output |
| Assignment |
Channel 1, channel 2, or both (as input) Channel 1 or channel 2 (as output) |
| Polarity |
Positive or negative slope |
| Voltage level (nom) |
0 V to 0.4 V for low,
> 2.3 V for high, 3.5 V maximum (as input)
3 Vpp (nom) into open circuit, 1.5 Vpp (nom) into 50 Ω (as output) |
| Impedance (nom) |
10k Ω, DC-coupled (as input) 50 Ω (as output) |
| Minimum pulse width (nom) |
16 ns |
| Input rate |
DC to 1 MHz |
| Minimum pulse width |
100 ns (as input) |
| Duty cycle (nom) |
50% (as output) |
| Trigger delay |
0 s to 1000 s, 4 ns resolution; applies to all trigger events |
| Input latency (typ) |
< 135 ns with Trigger Delay set to zero |
| Input jitter (typ) |
< 2.5 ns, rms |
| Fanout |
≤ 4 total Keysight 33500B Series waveform generators |
| Modulation input |
| Connector |
Rear-panel BNC, isolated |
| Assignment |
Channel 1, Channel 2, or both |
| Voltage level |
±5 V full-scale |
| Input impedance (nom) |
5k Ω |
| Bandwidth (-3 dB, typ) |
0 Hz to 100 kHz |
| Frequency reference input |
| Connector |
Rear-panel BNC, isolated from chassis and all other connectors |
| Reference selection |
Internal, external, or auto |
| Frequency range |
Standard: 10 MHz ± 20 Hz
Option OCX: 10 MHz ± 1 Hz |
| Lock time (typ) |
<2 s |
| Voltage level |
200 mVpp to 5 Vpp |
| Input Impedance (nom) |
1k Ω || 20 pF, AC-coupled |
| Frequency reference output |
| Connector |
Rear-panel BNC, chasis-referenced |
| Frequency (nom) |
10 MHz |
| Output impedance (nom) |
50 Ω, AC-coupled |
| Level (nom) |
0 dBm, 632 mVpp into 50 Ω |
| Real-time clock/calendar |
| Set and read |
Year, month, day, hour, minute, second |
| Battery |
CR-2032 coin-type, replacable, >5-year life (typ) |
| Programming times (meas.) |
|
| Configuration change speed |
|
|
LAN (socket) |
LAN (VXI-11) |
USB 2.0 |
GPIB |
| Change function |
5 ms |
6 ms |
5 ms |
5 ms |
| Change frequency |
2 ms |
3 ms |
2 ms |
3 ms |
| Change amplitude |
20 ms |
20 ms |
19 ms |
22 ms |
| Select user arb (16 k) |
9 ms |
11 ms |
9 ms |
9 ms |
| Arbitrary waveform download
speed to volatile |
| (binary transfer) |
LAN (socket) |
LAN (VXI-11) |
USB 2.0 |
GPIB |
| 4 k sample |
6 ms |
18 ms |
8 ms |
39 ms |
| 1 M sample |
1.3 s |
2.6 s |
13 s |
9.1 s |
| Memory |
| Arbitrary waveform and
instrument state memory |
| Volatile |
1x106 samples per channel or 16x106 samples per channel (Option
MEM) 512 sequence steps per channel |
| Non-volatile |
File sytem file space is limited to 64 MB (~32 MSa of arbitrary
waveform records) |
| Instrument state |
| Store / Recall |
User defined instrument states |
| Power Off |
Power Off state automatically saved |
| Power On |
Factory default settings or last power off settings |
| USB File System |
| Front-panel port |
USB 2.0 high-speed mass storage (MSC) class device |
| Capability |
Read or write instrument configuration settings, instrument
states and user arbitrary waveform and sequence files. |
| Speed |
10 MB/s (nom) |
| General characteristics |
| Computer interfaces |
| LXI- C (rev1.3) |
10/100Base-T Ethernet (Sockets & VXI-11 protocol) USB2.0 (USB-TMC488 protocol) GPIB/IEEE-488.1, IEEE-488.2 |
| Web user interface |
Remote operation and monitoring |
| Programming language |
SCPI-1999, IEEE-488.2
Keysight 33210A / 33220A compatibile |
| Graphical display |
4.3" Color TFT WQVGA (480x272) with LED backlight |
| Mechanical |
| Size |
261.1mm W x 103.8mm H x 303.2mm D (with bumpers installed) 212.8mm W x 88.3mm H x 272.3mm D (with
bumpers removed) 2U x 1/2 rack width |
| Weight (nom) Environmental |
3.3 kg (7.2 lbs) |
| Storage temperature |
-40"C to 70‘C |
| Warm-up time |
1 hour |
| Operating environment |
EN61010, polution degree 2; indoor locations |
| Operating temperature |
0‘C to 55‘C |
| Operating humidity |
5% to 80% RH, non-condensing |
| Operating altitude |
up to 3000 meters |
| Regulatory |
| Safety |
Complies with European Low Voltage Directive and carries the
CE-marking. Conforms to UL 61010-1,
CSA C22.2 61010-1, and IEC 61010-1:2001 |
| EMC |
Complies with European
EMC Directive for test and measurement products.
- IEC/EN 61326-1
- CISPR Pub 11 Group 1, class A
- AS/NZS CISPR 11
- ICES/NMB-001
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada |
| Acoustic Noise (nom) |
SPL 35 dB(A) |
| Line power |
| Voltage |
100 V - 240 V 50/60 Hz -5%, +10% 100 V - 120 V 400 Hz ±10% |
| Power consumption (typ) |
< 45 W, < 130 VA |
| Definitions |
| Specification
(spec) |
| The warranted performance of a
calibrated instrument that has been stored for a minimum of 2 hours within
the operating temperature range of 0° C - 55° C and after a 45-minute warm up
period. All specifications include measurement uncertainty and were created
in compliance with ISO-17025 methods.
Data published in this document are specifications (spec) only where
specifically indicated. |
| Typical (typ) |
| The characteristic
performance, which 80% or more of manufactured instruments will meet. This
data is not warranted, does not include measurement uncertainty, and is valid
only at room temperature (approximately 23°C). |
| Nominal (nom) |
| The mean or average
characteristic performance, or the value of an attribute that is determined
by design such as a connector type, physical dimension, or operating
speed. This data is not warranted and
is measured at room temperature (approximately 23°C). |
| Measured (meas) |
| An attribute measured during
development for purposes of communicating the expected performance. This data
is not warranted and is measured at room temperature (approximately 23°C). |
| Accuracy |
| Represents the traceable
accuracy of a specified parameter. Includes measurement error and timebase
error, and calibration source uncertainty.
Random measuremet errors are combined using the root-sum-square method
and are multiplied by M for the desired Confidence Level. Syatematic errors
are added linearly and include time skew errors, trigger timing errors, and
timebase errors as appropriate for each measurement type. |
| Confidence Level |
| ID модель производителя |
33522B
|
| Производитель |
|
